Spin Pull to Pressure Pneumatic / Hydraulic Tool
The P 803 tool installs the RIVNUT® or RIVSTUD® by pull to pressure control.
Once the pull to pressure force is set the P 803 will install the RIVNUT® or RIVSTUD® into single, multiple or variable thickness materials without further
adjustment.
Installation Sequence Press the RIVNUT® or RIVSTUD® fastener threads against the tool mandrel for automatic spin on. Insert the fastener into the hole in the parent material and pull the trigger. The P 803 installs the fastener and automatically reverses.
Features Single stage trigger controls complete installation sequence Automatic timed reverse spin and stop for maximum speed Installs 20 to 30 pieces per minute Ergonomic grip and balance for operator comfort Weight: 4.4 lbs. (2.0kg) Max. Stroke: .275 in. (7,0mm) Max. Pull Force: 3800 lbs. (17kN) 80 PSI (5.5 BAR) of clean dry air required for operation
Spin Pull to Stroke Pneumatic / Hydraulic Tool
The P 330 tool installs the RIVNUT® and RIVSTUD® by pull to stroke distance
control. The stroke of the tool is set to install the fastener in a specific
material thickness.
Installation Sequence Press the RIVNUT® or RIVSTUD® fastener threads against the tool mandrel for automatic spin on. Insert the fastener into the hole in the parent material and pull the lower trigger installing the fastener. Pull the upper reverse trigger completing the installation.
Features Rocker Style forward and reverse trigger Installs 10 to 15 pieces per minute Balanced for operator comfort Installs the widest range of RIVNUT® and RIVSTUD® fasteners Weight: 6.2 lbs. (2.8kg) Max. Stroke: .275 in. (7,0mm) Max. Pull Force: 4,700 lbs. (21.0 kN) 75 PSI (5.2 BAR) of clean dry air required for operation
Spin Pull to Stroke Pneumatic / Hydraulic Tool
The C 362 tool installs the RIVNUT® by pull to stroke distance control. Once the stroke distance is set the tool will install the RIVNUT® in a specific material thickness. The C 362 tool features a 10,000 pound (44.5 kN) pulling force enabling it to install the
largest size RIVNUT® products.
Installation Sequence Install the RIVNUT® onto the tool mandrel by squeezing the trigger to the first stop. Place the fastener into the hole in the parent material and pull and hold down the trigger to the final stop for installation and reverse. Release the trigger.
Features Weight: 11.5 lbs. (5.2 kg) Max. Stroke: .370 in. (9,4 mm) Max. Pull Force: 10,000 lbs. (44.5 kN) 80 PSI (5.5 BAR) of clean lubricated air required for operation
Pull to Stroke Pneumatic / Hydraulic Tool
The C 900 tool installs the RIVNUT® by pull to stroke distance control. The stroke distance is set and the tool installs the RIVNUT® in a specific material thickness. The C 900 tool incorporates a hydraulic intensifier with a manual thread on thread off knob.
Installation Sequence Thread the RIVNUT® fully onto the tool mandrel. Place the fastener into the hole and activate the pedal trigger on the intensifier unit. Unthread the tool mandrel from the installed RIVNUT® by turning the knob.
Features Tool Weight: 4.2 lbs. (1.9 kg) Max. Stroke: .750 in. (19,0 mm) Max. Pull Force: 10,000 lbs. (44.5 kN) 80 PSI (5.5 BAR) of clean dry air required
