RIVNUT® EZ

The RIVNUT® EZ is the latest innovation in RIVNUT® technology. There are 4 designs to choose from in thread sizes 6-32 through 3/8-16 and M4 through M10 with each featuring a minimal body size to fit into the smallest spaces and a tapered shank for easy hole insertion.
RIVNUT® EZ fasteners make fastening easy as they: Install blind eliminating the need to have access to the backside of the workpiece. Install into tubing without the need for backside access. Install into galvanized steel or pre-painted materials without damaging surface coating. Install without warping the workspace. Install after finish to eliminate thread masking. Install into materials as thin as .020 or 0.5mm. Install without producing dust, gas or electromagnetic fields as with weld nuts. Install into a wide range of materials thickness and types. Install with light-weight hand held tools right on the assembly line.		Principle

	The RIVNUT® EZ Flat Head Round Body fastener is ideal for punched or drilled holes in sheetmetal, tubing and plastics. Avialable in 6-32 to 3/8-16 and M4 to M10 thread sizes in steel in zinc/yellow finish. Knurled body for increased spin out resistance Tapered shank for easy hole insertion Flat head for automation feeding Minimal body size to fit into small spaces Minimal thread entry for mating screw cross thread prevention

	The RIVNUT® EZ Thin Head Round Body installs practically flush without special hole preparation in punched or drilled holes in sheetmetal, tubing and plastics. Available in 6-32 to 3/8-16 and M4 to M10 thread sizes in steel with zinc/yellow finish. Knurled body provides excellent spin out resistance Tapered shank for easy hole insertion Minimal body size to fit into small spaces Minimal thread entry for mating screw cross thread prevention

	The RIVNUT® EZ Flat Head Hex Body is ideal for punched holes in sheetmetal or tubing. Available in 6-32 to 3/8-16 and M4 to M10 thread sizes in steel with zinc/yellow finish. Full length sharp corner Hex body for ultimate spin out resistance Tapered shank for easy hole insertion Minimal body size to fit into small spaces Minimal thread entry for mating screw cross thread prevention

	The RIVNUT® EZ Thin Head Hex Body installs practically flush without special hole preparation in punched holes in sheetmetal or tubing. Available in 6-32 to 3/8-16 and M4 to M10 thread sizes in steel with zinc/yellow finish. Full length sharp corner Hex body for ultimate spin out resistance Tapered shank for easy hole insertion Minimal thread entry for mating screw cross thread prevention