Installation notes

QUICKLOC® Pressure fastener - Series 140

Panel A
(see grip range table)	Fastener upper part Punch or drill panel Ø 8.5 mm for panel (A) thickness up to 4.8 mm countersink or de-burr lightly for panel (A) thickness above 4.8 mm counterbore reverse side Ø 16.0 mm to accept retaining washer Insert fastener and secure at rear with retaining washer.


Frame B
	Receptacle Punch or drill frame Ø 12.5 mm for frame thickness up to 2.0 mm dimple and lock with nut
	for panel (A) thickness above 2.0 mm countersink from above Ø 15.5 mm and lock with nut
	for screw-in application a screwed depth of at least 23.0 mm must be allowed, with countersink from above Ø 15.5 mm