|
Mechanical insertion tool with hydraulic-pneumatic drive for medium to large production runs | ||||||||||||||||||||||
| Working method: Blind rivet nut is fitted on spindle by automatic contact mechanism; riveting process is hydraulic/pneumatic; spindle is then withdrawn by actuating rocker lever. Travel limiting by setting ring. Bayonet fitting for spindle change. Main use: medium to large production runs. Technical data: Performance – up to 15 pcs/min, Weight – 2.7 kg, Max. insertion travel – 7 mm, Insertion force – 21,000 N at 6-7 bar. Article number: 2661 530 0001 | ||||||||||||||||||||||
| ||||||||||||||||||||||
 | | |||||||||||||||||||||
| | |||||||||||||||||||||
| Hand insertion tool for small production runs | ||||||||||||||||||||||
| Working method: single dimensional riveting tool with screw drive. Blind rivet nut fitted to and removed from spindle by hand, using lever-key and spanner supplied. Main use: short runs and single builds. Technical data: Performance – up to 2 pcs/min, Weight – 0.7 kg, Max. insertion travel – 6 mm. This tool is supplied with chuck and threaded bolt. | ||||||||||||||||||||||
| ||||||||||||||||||||||
