orange square QUICKSERT® Hex

Technology

The QUICKSERT® Hex consists of a cylindrical body with an internal thread, a hexagonal driving bore and a special outer thread. The outer thread profile has an extremely low pitch angle which increases asymmetrically towards the root of the thread.

efficient assembly thanks to driver shape
reduced radial stressing due to extra small pitch angle
enables installation with a low screwing torque
for thermoplastics and thermosets
hand-held screwdriver PANTHER® with automatic feeding
high load-bearing, torsion-resistant thread
Dimensions
Type 1437
Type 1438
d
Brass, standard Product code
Brass, flanged Product code
l
l2
d2
d3
Lmin.
amin.
SW
M 4
1437 504 0008
1438 504 0009
8.0
1.0
7.0
10.0
9.0
3.0
3.2
M 5
1437 505 0010
1438 505 0112
10.0
1.2
8.0
11.0
11.0
4.0
4.0
M 6
1437 506 0014
1438 506 0154
14.0
1.4
10.0
13.0
15.0
4.0
5.0
M 8
1437 508 0015
1438 508 0164
15.0
1.4
12.0
15.0
16.0
5.0
7.0
Recommended locating hole -D- for QUICKSERT® Hex in various materials1
M 4
M 5
M 6
M 8
PE (soft), PP
5.6
6.6
8.1
10.1
PA 6, PA 6.6, PBT, PE (hard), PET, POM
5.8
6.8
8.3
10.3
ASA, SAN
6.0
7.0
8.5
10.5
ABS, PA 6 GF 30%, PBT GF 30%, PET GF 30%, PS, PVC (hard)
6.2
7.2
8.7
10.7
PA 6.6 GF 30%, PC u. PC + GF 30%, PPO/PPS GF 30%
6.4
7.4
9.0
11.0
SMC, ZMC, BMT
6.6
7.6
9.4
11.4
1 Standard value: depends on mould material; modify after assembly tests where necessary.
Locating hole

Insert tools
Semi-automatic
d
Product code
M 4
1467 020 5040
M 5
1467 020 5050
M 6
1467 020 5060
M 8
1467 020 5080
Manual installation spindle

For small to medium size self-tapping inserts.
Suitable for fitting to battery-powered screwdriver or pneumatic installation tool
(e.g. type P-S 1216).

Outer hexagonal DIN 3126-E6.3
Pneumatic
Technical details:
Total length265 mm
Diameterabout 33 mm
Speed (no-load)950 min-1 at p = 6.3 bar
Adjustable at compressed air supply
Compressed air connectionG 1/4"
Air consumption5.5 L/s bei p = 6.3 bar
TorqueM = 1.2 - 5.5 Nm
Clutch with step-less adjustment
Tool holderQuick-release chuck, 1/4" socket DIN 3120-E6.3 with radial bearing for installation spindle
Weight0.8 kg
Product code65000 4160 180 0010
Type P-S 1216

For rapid setting of QUICKSERT® Hex.
Technical details:
Measurements
Total length560 mm
Hand grip diameter38 mm
Weight1.6 kg
Insert dimensions
DimensionsM 4 - M 6
Flange diameterto 13 mm
Insert lengthto 30 mm
Torque0.8 - 5 Nm
Speed500 1/min
Hand-held screwdriver PANTHER®
with automatic QUICKSERT® Hex feed line

The PANTHER® uses a fixed QUICKSERT® Hex, to ease finding the locating hole and inserting the QUICKSERT® Hex.
The PANTHER® tool is started when the patented axial start strip is pressed. The power starter strip prevents accidental starting when the tool is picked up by the operator.
The new ergonomic design of the PANTHER® includes a hand grip shaped to match the hand and hand movements during installation.
Technical details:
Compressed air6 bar
Sort pot diameter200 mm - 400 mm
Weightabout 25 kg - 80 kg
Fill volumeabout 0.8 l / 2 kg - 2.5 l / 7kg
For automatic sorting, positioning and feeding of QUICKSERT® Hex, Böllhoff offers you the electromagnetic helical feeder.


letzte Änderung dieser Seite am 29.01.2006